The DS-100 is a 100 MHz isolation amplifier designed to distribute signals with frequencies from 1 to 200 MHz. A X2 or X4 multiplier option is available to provide auxiliary outputs at the multiplied frequency. The DS- 100 offers 50 dB of channel to channel isolation and 60 dB of reverse isolation at 100 MHz. The exceptionally low phase noise -150 dBc/Hz at 10 Hz and –170 dBc/Hz for the noise floor ensures that your reference frequencies are not degraded. The input and outputs have a low VSWR to minimize environmental effects on frequency distribution through long transmission lines. The standard unit provides four output channels.

DS-100 Users Manual
Request a quote for this item..

FeaturesApplications
  • Unity gain
  • Low VSWR
  • High isolation:              70 db @ 5 MHz
                                            50 db @ 100 MHz
  • Low phase noise:          -150 dBc/Hz @10Hz
                                            -170 dBc/Hz @10kHz
  • Low distortion:  -40 dBc
  • Max. output:  +15 dBm
  • Frequency synthesis chains
  • Reference frequency distribution
Specifications
ParameterConditionsMinTypMaxUnits
Input Power   - +13 +15 dBm
Bandwidth +/-1 dB
+/-3dB		 80-120
1-200		 -
-		 -
-		 MHz
MHz
Gain @100MHz - 0 +/-1 dB
Input VSWR 1-100 MHz - 1.3 - -
Output VSWR 1-100 MHz - 1.4 - -
Impedance Input
Output		 - 50
50		 -
-		 Ohms
Distortion +10 dBm
+13dBm		 -
-		 -40
-40		 -
-		 dBc
100 MHz Isolation Output to output
Output to input		 50
60		 50
60		 -
-		 dB
Phase noise 10 Hz
100 Hz
10kHz		 -
-
-		 150
160
170		 147
157
167		 dBc/Hz
All tests done at 100 MHz and +13 dBm input unless otherwise specified.

Copyright(c) 2006 SpectraDynamics, Inc. All rights reserved.
webmaster@spectradynamics.com